![]() ![]() Navigate to the Logical Devices tab and choose the A dd Device button to create a new Logical Device, as shown in the image:Ĭonfigure an FTD device with the settings shown in the image:Īfter creation of the logical device, the Provisioning – device_name window displays. Create and Configure New Logical DeviceĬreate an FTD as a Standalone Logical Device and deploy it. On the Interfaces tab, choose the interface, select Edit, and configure the Management interface, as shown in the image: Note: PortChannel 48 is used for clusters. Create a Port Channel Data Interface.Ĭreate a new Port Channel Interface, as shown in the image:įor the Port Channel ID, a value from 1 to 47. To create a new Port Channel interface, choose the Add Port Channel button, as shown in the image: ![]() To create a new interface, log in to the FCM and navigate to the Interfaces tab. Configure FTD Management and Data InterfacesĬonfigure and enable Management and Data interfaces for FTD on the Firepower appliance. Name Version Description Author Deploy Type CSP Type Is Default AppĪsa 9.6.2.3 N/A cisco Native Application Noįtd 6.1.0.330 N/A cisco Native Application No The image is shown in the chassis repository: KSEC-FPR4100 /ssa/app-software # exit Use this command to verify the successful download: FPR4100 /ssa/app-software # show download-taskįile Name Protocol Server Port Userid StateĬisco-ftd.6.1.0. Ftp 10.229.24.22 0 ftp Downloadedįor additional details: KSEC-FPR4100 /ssa/app-software # show download-task fsm status expand File Name: cisco-ftd.6.1.0.Īffected Object: sys/app-catalogue/dnld-cisco-ftd.6.1.0./fsmįile Name: Cisco_FTD_SSP_Upgrade-6.1.0-330.sh State: Downloading Transfer Rate (KB/s): 47520.000000Ĭurrent Task: downloading image cisco-ftd.6.1.0. from 10.229.24.22(FSM-STAGE:sam:dme:ApplicationDownloaderDownload:Local) To download the FTD image, navigate to this scope and use the download image command: FPR4100# scope ssaįPR4100 /ssa/app-software # download image monitor the image upload progress: FPR4100 /ssa/app-software # show download-task detail You can upload the FTD image from an FTP, Secure Copy (SCP), Secure FTP (SFTP), or a TFTP server.īefore the image transfer starts, verify connectivity between the chassis management interface and the remote server: FPR4100# connect local-mgmt Method 2 - Upload the FTD image from the FXOS CLI Choose Upload Image to upload the file, as shown in the image.īrowse to choose the FTD image file and click Upload, as shown in the image:Īccept the End User License Agreement (EULA). Log into the FPR4100 Chassis Manager and navigate to System > Updates tab. Method 1 - Upload the FTD image from the FCM UI. Upload the FTD image into FPR4100 chassis. Upload FTD Image into Firepower Appliance From FXOS CLI: FPR4100# show fabric-interconnect firmware Method 2. Navigate to FCM System > Update page, as shown in the image: From Firepower Chassis Manager (FCM) UI Overview page, as shown in the image: If the FXOS image is not compatible with the target FTD image, upgrade the FXOS software first. The minimum required FXOS version to run FTD 6.1.x is 1.1(4.95), as shown in Table 2: In the FXOS Compatibility Guide, check the Logical Device Compatibility table. Check the FXOS-FTD compatibility.īefore you install an FTD image into the module/blade, ensure the Firepower chassis runs a compatible FXOS software. Verify the FXOS version that runs on the chassis is compatible with the FTD version you want to install in the security module. Navigate to Next-Generation Firewalls (NGFW) > FirePOWER 4100 Series > FirePOWER 4140 Security Appliance and choose Firepower Threat Defense Software as shown in the image. Background InformationįTD is a unified software image that can be installed on these platforms: If your network is live, ensure that you understand the potential impact of any command. All of the devices used in this document started with a cleared (default) configuration. The information in this document was created from the devices in a specific lab environment. Firepower Management Center, which runs 6.1.0.330.Cisco Firepower 4140 Security Appliance, which runs FXOS 2.0(1.37).The information in this document is based on these software and hardware versions: There are no specific requirements for this document. This document describes the installation, upgrade, and registration of Firepower Threat Defense (FTD) software on Firepower appliances. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |